NEC Xen Topaz Features And Specifications Manual page 86

NEC Business Solutions Ltd
• Operation
To activate Call Forwarding Off-Premise
1. Press SPK key (or lift handset) and dial 713.
2. Dial 6 + trunk access code:
3. Dial the outside number to which your calls should be forwarded.
4. For System Phone only, press HOLD.
5. Press SPK (or hang up at SLT) to hang up.
Chapter 4 - 78
15-07-01: Programmable Function Keys
For one-touch access to the Call Forwarding Device setup code (713),
assign a function key (17) for Call Forwarding (Device).
For Off-Premise Call Forwarding by a Doorphone, assign a function key
(54) if required.
20-06-01: Class of Service for Extensions
Assign Class of Service (1-15) to an extension.
20-11-12: Class of Service Options (Hold/Transfer Service) - Call Forwarding
Off- Premise
In an extensions Class of Service, enable (1) or disable (0) setting up
Call Forwarding Off-Premise at the extension.
21-03-01: Trunk Group Routing for Trunks
Assigns the routes set in Program 14-06 for use with automatic external
call forward.
For each mode, assign the trunks used for call forward off-premise to
Route Table Number 1.
24-02-07: Forced Release Timer for Trunk to Trunk Transfer
All trunk to trunk transferred calls will be disconnected after this timer
has expired (default=30 minutes). Set this timer to 0 to prevent call cut
off. This applies to a manual trunk to trunk transfer call.
25-07-07: DISA Conversion Warning Tone Time
Determine the length of time a DISA/T2T/CFOP caller can talk before
the Long Conversation tone is heard (0-64800 seconds).
25-07-08: DISA Long Conversation Disconnect
This timer determines how long the system will wait before disconnect-
ing a call after the Long Conversation tone from Program 25-07-07 is
heard (0-64800 seconds)
32-01-03: Doorphone Timers - Off-Premise Call Forward by Doorphone Dis-
connect Timer
Define the conversation period for an Off-Premise Call Forward by Door-
phone call. When this timer expires, the caller will hear busy tone for 3
seconds (fixed timer) and the call will then be disconnected (0-64800).
-OR-
Press Call Forward (Device) key (PGM 15-07 or SC 851: 17).
0(ARS/Trunk Group Routing),
804 + Line Group (01- 25),
805 + Line number (e.g., 05 for line 5).
XEN Topaz
Features