NEC Xen Topaz Features And Specifications Manual page 389

XEN Topaz
• Related Features
• Operation
Warning Tone for Long Conversation is automatic if programmed.
Features and Specifications Manual
20-21-01: System Options for Long Conversation - Long Conversation Alarm
1
After a user places a trunk call, the system sends the first warning tone
to their extension after this interval (0-64800 seconds).
20-21-02: System Options for Long Conversation - Long Conversation Alarm
2
After hearing the first warning tone, the system sends additional warning
tones after this interval (0- 64800 seconds). The warning tones continue,
spaced by this interval, until the user hangs up.
21-01-03: System Options for Outgoing Calls - Trunk Interdigit Time (Exter-
nal)
Determine the length of time the system should wait before starting the
Warning Tone Timer.
25-07-07: System Timers for DID/DISA - DISA Conversation Warning Tone
Time
Determine the length of time the system should wait before the Warning
Tone is heard by DISA callers (0-64800 seconds). If an outside call is
transferred or forwarded off-premise using an outside trunk, this timer
starts immediately. This will occur if either trunk involved in the call is
programmed for the Warning Tone (Program 14-01-17).
25-07-08: System Timers for DID/DISA - DISA Long Conversation Disconnect
Determine how long after the Warning Tone is heard the system will wait
before disconnecting DISA calls.
• Central Office Calls, Answering
Warning Tone for Long Conversation does not occur for incoming trunk calls.
• Central Office Calls, Placing / Toll Restriction
Warning Tone for Long Conversation occurs for all outgoing trunk calls, regard-
less of how they are placed or other outgoing restrictions.
• Direct Inward System Access (DISA)
Warning Tone for Long Conversation can be enabled for DISA calls.
• Intercom
Warning Tone for Long Conversation does not occur for Intercom calls.
• Long Conversation Cutoff
Warning Tone for Long Conversation can be used with the Long Conversation
Cutoff feature for outgoing calls.
• Single Line Telephones
Warning tones are not available to single line telephone (SLT) users.
NEC Business Solutions Ltd
Chapter 4 - 381