NEC Xen Topaz Features And Specifications Manual page 276

NEC Business Solutions Ltd
Conditions
Default Setting
The first 12 keys on a telephone are assigned by default as line keys (e.g., key 1 = line
01). Key 22 on each telephone is assigned as a both way loop key (type *05 + 0).
• Programming
• Related Features
• 24 Button Add on Console
The 24 button add on console can be attached to any Topaz Vision phone and will
provide 24 additional programmable function keys.
The keys can be programmed by the user with service codes 851 or 852 in exactly the
same way as the 22 function keys on the phone.
They can also be programmed within Topaz Configuration Mode using program 15-07-
01. The add on console uses keys 23 to 46 within program 15-07-01.
Chapter 4 - 268
A. When a key is programmed using service code 852, that key cannot be pro-
grammed with a function using the 851 code until the key is undefined (000). For
example with a Park Key programmed by Dialling 852 + *04 must be undefined
by Dialling 000 before it can be programmed as a Call Forward key by Dialling
851 + 16.
B. Using Program 92-01 to copy a system phone's Programmable Function Keys will
copy all the keys whether they exist on the phone to which the programming is
being copied. This may cause confusion when trying to define a key which is
already defined but which doesn't exist on the phone (will display as "DUPLICATE
DATA". It is recommend to either clear these non-existent keys or to only copy
from an extension which has the same or fewer numbers of keys than the exten-
sion to which the programming is being copied.
15-07-01: Programming Function Keys
Assign the functions of a system phone's Programmable Function Keys.
Refer to Tables 4 and 5 at the beginning of this manual.
20-06-01: Class of Service for Extensions
Assign Class of Service (1-15) to extensions.
20-07-10: Class of Service Options (Administrator Level) - Programmable
Function Key
In an extension's Class of Service, enable (1) or disable (0) an exten-
sion's ability to program their own function keys.
Note: When programming a feature as a Programmable Function Key, refer to the
feature's description for additional programming options.
• Abbreviated Dialling
Abbreviated dialling and One-Touch Calling also offer quick access to calls and
features.
• Direct Station Selection (DSS) Console
Programming a 64-button console requires separate programming. Refer to this
feature for more details.
XEN Topaz
Features