NEC Xen Topaz Features And Specifications Manual page 144

NEC Business Solutions Ltd
Abbreviated Dial bin 1999 is used as the call forward destination for all night modes.
The disconnect timers are set to give a warning tone after 30 seconds and then
disconnect after another 15 seconds.
The outgoing trunk route is not defined.
Disconnect clear is not set.
Trunk to trunk call forward setting is enabled in Class of Service.
• Programming
• Related Features
•Operation
To set the destination number for each department group.
(Cannot be set from an analogue SLT.)
1. Press SPK to go off hook.
2. Dial 704.
3. Dial the department group number (01 to 64).
4. Dial the night mode number (1 to 8).
5. Dial the off premise destination number (include any trunk access digits for off premise).
6. Press HOLD to set the destination for other night modes.
7. Press SPK to hang up.
Chapter 4 - 136
11-11-25 : Service Code - 702
11-11-26 : Service Code - 703
11-10-08 : Service Code - 704
13-04-01 : Abbreviated Dial Name and Number
14-01-13 : Trunk to Trunk Transfer
15-07-01 : Programming Function Keys (Codes 58 and 59)
20-11-07 : Class of Service
21-03-01 : Trunk Route for Automatic Trunk to Trunk Routing
24-04-01 : Destination Abbreviated Dial Bin Number (bin 1999 is used at
default)
25-07-07 & 08 : DISA Conversation Timers
•Department Calling
•Trunk to Trunk Transfer
•Call Forward Off Premise
•Call Forward to Abbreviated Dial Bin
•Programmable Function Keys
XEN Topaz
Features