NEC Xen Topaz Features And Specifications Manual page 110

NEC Business Solutions Ltd
• Related Features
Chapter 4 - 102
Enable (1) or disable (0) the Incoming Call RNA Alarm. If enabled, the
ring cadence will change for a call that rings longer than the interval set
in 22-01-03.
22-01-03: System Options for Incoming Calls - Ring No Answer Alarm Time
Set the Ring No Answer Alarm interval (0-64800 seconds). If a trunk
rings a system phone-system phone longer than this interval, the system
changes the ring cadence.
22-01-04: System Options for Incoming Calls - DIL No Answer Time
If an incoming trunk call rings longer than this interval, it reroutes to the
Ring Group set in Program 22-08.
22-03-01: Trunk Ring Tone Range
Assign Ring Tone Ranges to trunks. Trunks ring extensions according to
the Ring Tone Range selected in 22-03-01.
22-04-01: Incoming Extension Ring Group Assignment
To have trunks ring extensions, assign extensions to ring groups (1-25).
For each extension in the Ring Group, indicate in Program 22-06 if
trunks should ring (1) or not ring (0).
22-05-01: Incoming Trunk Ring Group Assignment
To have the trunks ring extensions, assign trunks to a Ring Group.
22-06-01: Normal Incoming Ring Mode
Indicate whether the trunks in the Ring Group assigned in 22-04 should
ring (1) or not ring (0).
22-08-01: DIL/IRG No Answer Destination
If an incoming trunk call rings longer than the DIL No Answer Time (Pro-
gram 22-01-04), it routes to the destination you specify in this option.
Determine if the destination should be a Ring Group (1-25) or DSPDB
Voice Mail (101)
23-03-01: Universal Answer/Auto Answer
For Universal Answer, assign trunk routes (1-25) set in Program 14-06 to
extensions. An extension user can use Universal Answer to answer a
call if the ringing trunk is in its assigned route.
• Central Office Calls, Answering Call Forward/DID/DIL/DISA/Do Not
Disturb/ISDN
The Reason for Transfer option should be set for each type of trunk which will use
the Reason for Transfer message.
• Directed Call Pickup/Group Call Pickup
Using these features, ringing calls can be picked up regardless of access map
programming.
• Direct Inward Line
Direct Inward Lines ring an extension directly, without Ring Group or Access Map
programming.
• Line Preference
An extension user can answer an outside call just by lifting the handset.
• Long Conversation Cutoff/Warning Tone for Long Conversation
XEN Topaz
Features