Call Forwarding Toggle In A Personal Speed Dial Bin; Call Forwarding Confirmation Tone - NEC DSX Software Manual

Call Forwarding Toggle in a Personal Speed Dial Bin

If an extension doesn't have an available Feature Key for a Call Forwarding key, the user can program a Per-
sonal Speed Dial bin for similar operation (without the BLF). To do this:
While on hook, dial
❥
Press the key for the Personal Speed Dial bin you want to program +
❥
For LINE/GRP/ICM
❥
For NUM
❥
For
NA
❥
Press SPEAKER
❥
While the extension is idle, pressing the bin key puts the extension in the Call Forwarding programming
mode - the same as pressing
If the extension has Call Forwarding enabled, and the user presses the bin key and waits (for at least 6
❥
seconds), Call Forwarding is automatically cancelled.
If the extension has Call Forwarding disabled, and the user presses the bin key and waits (for at least 6
❥
seconds), the prior Call Forwarding mode is automatically enabled (if any).
Call Forwarding Confirmation Tone
Keyset users will hear a single confirmation beep after enabling or cancelling Call Forwarding. Single line
telephone users will hear Intercom dial tone after enabling or cancelling Call Forwarding.
DSX Software Manual
#77 .
, press INTERCOM
, dial *3 + HOLD .
, enter a name of your choosing +
to exit.
INTERCOM
+ HOLD .
.
HOLD
and dialing .
*3
Call Forwarding
.
HOLD
Features ◆ 45