NEC Xen Topaz Features And Specifications Manual page 34

NEC Business Solutions Ltd
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
For this feature...
Call Forwarding, No Answer
Call Forwarding, Off-Premise
Call Forwarding, Station
Call Forwarding / Do Not Disturb
Override
Callback / Camp On/ Trunk
Queuing
Call Redirect
Central Office Calls
Conference
Conference, Voice Call
Data Communications
Chapter 3 - 26
Table 4: Function Key Codes by Features
code.
Use this key...
Code: 12
Operation: Press key + 1/0
+ Dest. Extension
Code: 17
Operation: Press key +
device type code +
requested data (depends on
device selected).
Code: 16
Operation: Press key +
Condition + Dest. Extension
+ Type
Code: 37
Operation: Call
extension + Press key
Code: 35
Operation: Call busy
extension or access busy
trunk + Press key
Code: 49 + extension or
voice mail
Operation: Press key
Code: *01 + Trunk number
(01-51)
Operation: Press key
Code: 07
Operation: Set up call +
Press key + set up call to add
+ Press key twice
Code: 32
Operation: Set up trunk call
+ Press key
Code: 66
Operation: Press key + ext
or outside number
When your are...
Call Forwarding No
Answer to extension or
Voice Mail
Setting up Call
Forwarding Off-
Premise, Selectable
Display Messaging,
VRS Park and Page
and VRS
Personal Greeting
Call Forwarding Station
to extension or Voice
Mail
Overriding an
extension's Call
Forwarding or Do Not
Disturb
Leaving a Call back
request at a busy
extension, Camping On
to a busy extension, or
Queuing for a busy
trunk
Redirect a ringing call
to the predefined
destination
Pressing a line key to
place or answer a trunk
call (where trunks are
01-51)
Setting up a
Conference or a Meet
Me Conference
Setting up a Voice Call
Conference
Placing a data call
Charts and Illustrations
XEN Topaz
Key Lamp Status
Slowly flashes red
Slowly flashes red
Slowly flashes red
None
On red when
activated
On red when
activated
On green when
seized, on red when
in use (by other
party), Slow Flash
green when ringing,
Hold flash when on
Hold
On red during setup
None
On red when call
set up