NEC Xen Topaz Features And Specifications Manual page 358

NEC Business Solutions Ltd
Storing Single Digit Dialling Destinations
By default, destinations for digits 1 and 2 are specified by storing them in Personal
Abbreviated Dialling bins 918 and 919 respectively.
Multiline Telephone:
Single Line Telephone:
SLT's cannot store abbreviated dialling numbers. Use WebPro/PCPro to store
Personal Abbreviated Dialling numbers for SLT ports. Or, specify in system
programming the use of Common Abbreviated Dialling bins (in PRG 40-13-01), then
enter the required numbers using an MLT.
To Record a Greeting Message:
System Phone
Single Line Telephone
32# Record Message 1
33# Record Message 2
34# Record Message 3
Chapter 4 - 350
4. Hang up.
1. Press CALL key.
2. Dial 853.
3. Dial the Abbreviated Dialling bin number (default: dial 1= 918, dial 2 = 919).
4. Dial the telephone number you want to store:
- Extension number (up to 4 digits), or
- Outside number (trunk access code, e.g. 0, followed by telephone number).
5. Press HOLD.
6. Enter the associated name, using the dial pad characters.
7. Press HOLD.
8. Press SPK to hang up.
1. Press Voice Mail Access key (SC 851:67)
2. Dial service code (see table below)
3. Record your message, after the beep.
4. Dial 9# to end the recording.
5. Hang up.
1. Lift Handset.
2. Dial 884 (default).
3. Enter password.
4. Dial service code (see table below).
5. Record your message, after the beep.
6. Dial 9# to end the recording.
7. Hang up.
XEN Topaz
Features