NEC Xen Topaz Features And Specifications Manual page 342

NEC Business Solutions Ltd
• Related Features
• Operation
Note that at step 5 the destination number will be saved to the Abbreviated Dial bin
number specified by Program 24-04-01 for the chosen night mode.
If the same Abbreviated Dial bin is also used for other night modes then you do not
need to set them separately. For example at default bin number 1999 is used for all
night modes so when a night mode destination number is set for any night mode it will
be used for all night modes.
To set the call forward for incoming calls to a trunk:
To cancel the call forward for incoming calls to a trunk:
Chapter 4 - 334
20-07-05 : Class of Service
21-03-01 : Trunk Route for Automatic Trunk to Trunk Routing
24-04-01 : Destination Abbreviated Dial Bin Number
25-07-07 & 08 : DISA Conversation Timers
•Trunk to Trunk Transfer
•Call Forward Off Premise
•Call Forward to Abbreviated Dial Bin
•Department Group Call Forward
3. To set the destination number for each trunk port.
4. Press SPK to go off hook.
5. Dial 835.
6. Dial the trunk port number (001 to 200).
7. Dial the night mode number (1 to 8).
8. Dial the off premise destination number (do not include any trunk access digits).
9. Press HOLD to set the destination for other night modes.
10.Press SPK to hang up.
1. Press SPK to go off hook.
2. Dial trunk to trunk call forward service code - 833.
3. Dial the trunk port number (001 to 200).
4. Press SPK to hang up.
5. Repeat steps 1 to 4 for further trunk ports.
1. Press SPK to go off hook.
2. Dial trunk to trunk call forward cancel service code - 834.
3. Dial the trunk port number (001 to 200).
4. Press SPK to hang up.
5. Repeat steps 1 to 4 for further trunk ports.
XEN Topaz
Features