NEC Xen Topaz Features And Specifications Manual page 268

NEC Business Solutions Ltd
• Related Features
Chapter 4 - 260
21-05-12: Toll Restriction Class - PBX Call Restriction
For each Toll Restriction Class, enter 1 to restrict calls on the PBX trunk
to outside calls only. Enter 0 to allow users to dial PBX extensions.
21-06-08: Toll Restriction Table Data Setup - PBX Access Code
Enter the system PBX access codes. The system can have up to 4
groups of codes. A code can be one or two digits long. Valid entries are
0-9, # and *. Use Line Key 1 as a "don't care" digit. If using Account
Codes, do not use the * within the PBX Access Code.
81-01-14: Analogue Trunk Initial Data Setup - Hookflash 1
If the CONF key is set for transfer (in Program15-02-05), use this pro-
gram to set the duration of the flash that occurs when a user presses the
CONF key.
• Account Codes
When using Account Codes, do not use an asterisk within a PBX access code.
Otherwise, after the *, the trunk would stop sending digits to the central office.
• Abbreviated Dialling
• The system automatically pauses after it finds a PBX access code in
an Abbreviated dialling bin.
If Abbreviated dialling routes a call to a PBX trunk, it does not automatically insert
a PBX access code. It outdials the digits just as they are stored.
• Central Office Calls, Answering/ Ring Groups
Users answer incoming calls on PBX trunks just like other trunks. All of the rele-
vant access and Ring Group programming applies. Refer to these features for
more details.
• Central Office Calls, Placing
Except for dialling the PBX access code, users place calls on PBX trunks just like
other trunks. All of the relevant access programming applies. Refer to the Cen-
tral Office Calls Placing feature for more details.
• Direct Inward Lines
You can have DILs route from the connected PBX. Users can access these
trunks for outgoing PBX calls. All PBX Compatibility restrictions and program-
ming apply.
• Direct Inward System Access
You can program incoming DISA trunks to be outgoing PBX trunks. All PBX Com-
patibility restrictions and programming apply.
• Flash
Flash may allow access to certain PBX features - like Transfer. Make sure you
program Flash for compatibility with the connected PBX
• Toll Restriction
PBX trunks can follow normal system Toll Restriction.
• Trunk Groups and Trunk Group Routing
• Users can get outbound access to PBX trunks through Trunk Groups
and/or Trunk Group Routing. All PBX Compatibility restrictions and
programming apply.
If the system routes a call to a PBX trunk, it does not automatically insert the PBX
access code. It outdials the call just as the user dialled it.
XEN Topaz
Features