NEC Xen Topaz Features And Specifications Manual page 145

XEN Topaz
Note that at step 5 the destination number will be saved to the Abbreviated Dial bin
number specified by Program 24-05-01 for the chosen night mode.
If the same Abbreviated Dial bin is also used for other night modes then you do not
need to set them separately. For example at default bin number 1999 is used for all
night modes so when a night mode destination number is set for any night mode it will
be used for all night modes.
To set the call forward for incoming calls to a department group:
1. Press SPK to go off hook.
2. Dial department group call forward service code - 702.
3. Dial the department group number (01 to 64).
4. Press SPK to hang up.
5. Repeat steps 1 to 4 for further department groups.
Or
6. Press the department group call forward function key (851+58+group number). The key will
flash red when the call forward is set.
To cancel the call forward for incoming calls to a department group:
1. Press SPK to go off hook.
2. Dial department group call forward cancel service code - 703.
3. Dial the department number (01 to 64).
4. Press SPK to hang up.
5. Repeat steps 1 to 4 for further department groups.
Or
6. Press the department group call forward function key (851+58+group number). The key will
go out when the call forward is cancelled.
To set delayed call forward for incoming DDI Calls:
1. Press the department group delayed call forward function key (851+59+group number). The
key will flash red when the call forward is set.
2. Incoming DDI calls will ring at the department group until a timer expires (Program 24-02-08)
3. When the timer expires the call to the department group will forward to the destination num-
ber.
To cancel delayed call forward for incoming DDI Calls:
1. Press the flashing department group delayed call forward function key (851+59+group num-
ber). The key will go off when the call forward is cancelled.
Features and Specifications Manual
NEC Business Solutions Ltd
Chapter 4 - 137