Download Print this page
NEC Xen Topaz User Manual
NEC Xen Topaz User Manual

NEC Xen Topaz User Manual

Single line telephone
Hide thumbs Also See for Xen Topaz:

Advertisement

Conferencing
Establishing a Conference Call
Repeat for additional parties
FLASH
8
2
(Talking)
You can repeat this operation to add additional parties. You may
be able to have up to 8 parties in total (including your extension).
Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation
with respect to, any of the equipment covered. This manual is subject to change without notice and NEC Business Solutions
Ltd has no obligation to provide any updates or corrections to this manual. Further, NEC Business Solutions Ltd also reserves
the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No representation
is made that this manual is complete or accurate in all respects and NEC Business Solutions Ltd shall not be liable for any
errors or omissions. In no event shall NEC Business Solutions Ltd be liable for any incidental or consequential damages in
connection with the use of this manual. This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be photocopied or reproduced without prior written consent of NEC Business
Solutions Ltd.
Copyright © 2004 by NEC Business Solutions Ltd
All Rights Reserved.
NEC Business Solutions Ltd
633-647 Springvale Road,
Mulgrave VIC 3170
Extension Number
6
?
?
?
Trunk Code
Telephone
0
?
?
FLASH
<press twice>
October 2004
(Talk)
Issue 1.2
Intelligent Hybrid System
Single Line Telephone
User Guide

Advertisement

loading

Summary of Contents for NEC Xen Topaz

  • Page 1: Single Line Telephone User Guide

    No representation is made that this manual is complete or accurate in all respects and NEC Business Solutions Ltd shall not be liable for any errors or omissions.
  • Page 2 Using Your Telephone DND : Trunk & Intercom Incoming Call NEC AT-21 Single Line Telephone is displayed here. This User Guide describes general analogue Single Line DND : Transferred (CFW) Call Telephone (SLT) procedures. Refer to the User Guide included with to your specific SLT for details on additional key functions.
  • Page 3 Extension Extension Number System programming is required to allow Group Call Pickup. Ask your NEC Authorised Supplier for details. Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you hear a beep, begin Hold / Transferring Calls speaking.
  • Page 4 Cancelling Camp On / Callback / Trunk Queuing Answering Calls Answering an Outside / Intercom Call (When Camp On set) (Ringing) Each type of incoming call can have its own distinctive ringing pattern. Ask you NEC Authorised Supplier for details.