NEC Xen Topaz Features And Specifications Manual page 68

NEC Business Solutions Ltd
Chapter 4 - 60
card digits. If the system sees an entry of "2@@" then any table entries
which follow will be ignored. For example, if 268, 269, and 270 are local
exchanges, these would be the first three table entries which would
route according to the settings made in Program 26-02-02 and 26-02-03
for each of the table entries. If the next entry is "2@@", then the system
checks no further in this program and routes all other "2xx" numbers
according to the entries made in Program 26-02-02 and 26-02-03 for this
table entry.
26-02-02: Dial Analysis Table for ARS - Service Type
For each Dial Analysis Table (1-200), select '0' for no ARS, '1' for Ser-
vice Type 1 - Route to Trunk Group Number to have the number route to
a trunk group [Refer to Program 26-02-03] or '2' for Service Type 2 - F-
Route Selected to have the dialled number controlled by the F-Route
table. If Service Type 2 is selected and F-Route operation is on, the F-
Route table used is determined by Program 44-04. If F-Route operation
is off, the routing is determined by Program 44-05.
26-02-03: Dial Analysis Table for ARS - Service Number
For each Dial Analysis Table (1-200), if Service Type 1 was selected in
Program 26-02-02, enter the trunk group number (0-25, 0=no route).
26-02-04: Dial Analysis Table for ARS - ARS Class of Service
For each Dial Analysis Table (1-200), set the Automatic Route Selection
(ARS) Class of Service (0-16).
26-02-05: Dial Analysis Table for ARS - Dial Treatment
For each Dial Analysis Table (1-200), set the Automatic Route Selection
(ARS) Dial Treatment (0-15) to be used.
26-03-01: ARS Dial Treatment
Assign the 15 Dial Treatments for automatic ARS Dialling translation.
The ARS Dial Treatment options are:
• 3 - Delete the NPA if dialled as part of the initial call.
• 2 - Delete the leading digit if dialled as part of the initial call.
• 1 - Add a leading 1 if not dialled as part of the initial call.
• INPA - Insert the NPA specified by NPA.
• DNN - Outdial the NN number of digits or execute the code that follows.
For example, D041234 out-dials 1234. Valid entries are 0-9, #, *, Wnn
(wait nn seconds) and P (pause). Each digits code counts as a digit. So
for example, if a P was added for a pause, the entry would look like:
D05P1234. This Dial Treatment can only be added from telephone pro-
gramming.
• Wnn - Wait nn seconds.
• P - Pause in analogue trunk.
• R - Redial the initially dialled number, including any modifications
• E - End of Dial Treatment. All Dial Treatments must end with the E
code.
26-04-01: ARS Class of Service
Set an extension's ARS Class of Service (0-16). Automatic Route Selec-
tion uses ARS Class of Service when determining how to route an exten-
sion's calls.
XEN Topaz
Features