NEC Xen Topaz Features And Specifications Manual page 215

XEN Topaz
• Related Features
• Operation
Feature is automatic once programmed
Features and Specifications Manual
For each Dial Analysis Table (1-200), set the LCR Carrier Table (0-25) to
be used.
26-05-01: LCR Carrier Table - Delete Digits
26-05 defines the LCR Access Codes and routing options, including
Authorization codes and Cost Centre Codes. Enter here the quantity of
leading digits that need to be deleted.
26-05-02: LCR Carrier Table - Access Code
Enter the Access Code and Option to route to the Indirect Carrier.
26-05-03: LCR Carrier Table - Authorization Code Table
Enter the table number (0-10) that contains the correct Authorization
code.
26-05-04: LCR Carrier Table - Cost Centre Code
Specify whether an optional cost centre code can be entered.
26-06-01: LCR Authorization Code Table
Define the optional Authorization code (or PIN code) required by the
Indirect Carrier. The Authorization code is inserted if set in Program 26-
05-03.
26-07-01: LCR Cost Centre Code Table
Define the optional cost centre code required by the Indirect Carrier. The
cost centre code is set for each extension. The cost centre code is
inserted if set in Program 26-05-04, or if "Cost Centre Code Only" is
assigned in Program 14-01-23.
26-08-01: LCR Manual Override Access Code - Manual Override Access
Code
This code is dialled by the user to bypass the automatic selection.
26-08-02: LCR Manual Override Access Code - Carrier Table No.
Specify the carrier table number (0-25) defined in 26-05.
26-09-01: LCR Manual Override Exemption Table
Define the numbers that must not be sent via an indirect carrier when
the user dials a Manual Override Access Code. The exemptions are nor-
mally Emergency Services that may not be supported by the indirect
carrier.
• Cost Centre Codes
Send a cost center code for outgoing calls.
• Automatic Route Selection (F-Route)
ARS and F-Route Determine the appropriate trunk routing based on the digits
dialled.
NEC Business Solutions Ltd
Chapter 4 - 207