Alarm - NEC Xen Topaz Features And Specifications Manual

NEC Business Solutions Ltd

Alarm

• Description
Alarm lets a system phone extension work like an Alarm clock. An extension user can
have Alarm remind them of a meeting or an appointment. There are two types of
Alarms:
Conditions
Single line sets will ring and Music on Hold will be heard when the alarm sounds.
Default Setting
Alarm is enabled.
• Programming
• Related Features
None
• Operation
To set the alarm:
1. At system phone, press a SPK key.
2. Dial 827.
3. Dial alarm type (1 or 2).
4. Dial the alarm time (24-hour clock).
5. At system phone, press SPK to hang up.
To silence an alarm:
1. At system phone, press CLEAR.
Chapter 4 - 54
•
Alarm 1 (sounds only once at the preset time)
•
Alarm 2 (sounds every day at the preset time)
20-01-06: System Options - Alarm Duration
Set the duration of the Alarm signal (0-64800 seconds).
OR
At single line set, lift handset.
Alarm 1 sounds only once. Alarm 2 sounds each day at the preset time.
For example, for 1:15 PM dial 1315.
A confirmation tone will be heard if the alarm has been set. If the alarm was not set, an error tone will be
heard instead.
OR
At single line set, hang up.
Note: When Alarm 1 is set, the telephone display will show "Alarm 1" until the
alarm has sounded (Alarm 1 sounds once only at the assigned time).
Note: When Alarm 2 is set, no indication is given on the telephone display until the
alarm sounds (Alarm 2 sounds daily at the assigned time).
OR
At single line set, lift handset.
The single line set user will hear Music on Hold when the handset is lifted.
XEN Topaz
Features