NEC Xen Topaz Features And Specifications Manual page 38

NEC Business Solutions Ltd
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
For this feature...
Transfer
Trunk Group
Routing
Trunk Groups
Trunk Queuing
Voice Response System (VRS)
(Park and Page) (Personal
Greeting)
Voice Mail
Chapter 3 - 30
Table 4: Function Key Codes by Features
code.
Use this key...
Code: 06
Operation: Establish call +
Hold + Ext + Press key
Code: *05
Operation: Press key
Code: *02 + Trunk group (1-
9 or 01-51)
Operation: Press key
Code: 35
Operation: Hear busy tone
for Trk + Press key
Code: 17
Operation: Press key +
device type code +
requested data (depends on
device selected).
Code: 67 + extension or
Department Group number
Operation: Press key
Code: 68 + code (0-2)
Operation: Press key
When your are...
Transferring a call
Accessing a trunk using
Trunk Group Routing
Using a trunk group key
to access a Trunk
Group
Camping On or
Queuing for a trunk
Setting up Call
Forwarding Off-
Premise, Selectable
Display Messaging,
VRS Park and Page
and VRS
Personal Greeting
Calling Voice Mail or
leaving a message
Using Voice Mail
Service
Charts and Illustrations
XEN Topaz
Key Lamp Status
None
On red when active
On red when active
On red while
camped on
Flashes red
Flashes red on your
key for your
messages or flashes
red for the
Department Group
Flashes slowly when
monitoring