Cost Centre Codes - NEC Xen Topaz Features And Specifications Manual

NEC Business Solutions Ltd

Cost Centre Codes

•Description
Certain Network providers can accept a Cost Centre Code (CCC) that will be used to
provide an itemised bill from their Network provider.
The CCC is inserted automatically by the XN120 before the dialled digits and is
stripped off by the Network provider.
There are two methods that the XN120 can send CCC to the Network:
Send the CCC to the direct carrier.
OR
Send the CCC within the Least Cost Routing (LCR) access codes. You can then get
extension billing from the indirect carrier.
Conditions
You must confirm the quantity of CCC digits required by the Network provider otherwise
calls will not route correctly.
Confirm with the Network provider that Cost Centre Codes are supported if you also
have Carrier Pre-Select (CPS) operation.
Default Setting
Disabled.
• Programming
• Related Features
• Operation
The operation is automatic and cannot be bypassed.
Chapter 4 - 128
14-01-23 : LCR Mode - Select type 2: LCR ON(Cost Centre Code only).
26-07-01 : Cost Centre Codes - Set the CCC for each extension.
•LCR - Least Cost Routing
Cost Centre Codes can be combined with the LCR operation.
XEN Topaz
Features