NEC Xen Topaz Features And Specifications Manual page 104

NEC Business Solutions Ltd
Without time and date
With absence reason
Without time and date
With absence reason
• Programming
Chapter 4 - 96
1
2
1
2
10-02-03: Location Setup – Other Area Access Code
Enter the Other Area Access Code digits(default: 0) required to place an
outgoing call (8 digits maximum: 0-9, *, #). This is the code which will be
added to the Caller ID information for incoming trunk calls to allow the
call tho dial out if allowed in 20-19-03.
14-01-19: Privacy Mode Toggle Option
When enabled, post answer CCI display will not show CLI Number or
Name on the second row of the LCD. If the Line Key is pressed while the
line is set to private mode, CLI will then be displayed.
14-01-20: Basic Trunk Data Setup - Block Outgoing Caller ID
Allow (1) or prevent (0) the system from automatically blocking outgoing
Caller ID information when a user places a call. If allowed (i.e., block
enabled), the system automatically inserts the Caller ID block code
(defined in Program 14-01-21) before the user Dialled digits (this
requires Program 14-02-10 to be enabled). If prevented (i.e., block dis-
abled), the system out-dials the call just as it was Dialled by the user.
14-01-21: Caller ID Block Code
Enter the code, up to 8 digits, that should be used as the Caller ID Block
Code. This code is automatically inserted before Dialled digits if Program
14-01-20 is set to '1'.
14-02-06: Receiving Type FSK / DTMF
14-02-10: Analogue Trunk Data Setup - Caller ID
Enable (1) or disable (0) a trunk's ability to receive Caller ID name/num-
ber information. If this option is set to '1', the system will suppress ring-
ing and lamping for trunk calls for the first ring in order to receive the
Caller ID information.
14-02-16: Caller-ID Type for Analogue Trunk
Set the type of Caller ID received on each analogue trunk, FSK (0) or
DTMF (1) (default = FSK).
15-03-11: Caller-ID Type for External Module
Set the type of Caller ID sent to each analogue telephone, FSK (0) or
DTMF (1) (default = FSK).
20-06-01: Class of Service for Extensions
Assign Class of Service (1-15) to extensions.
20-08-15: Class of Service (Outgoing Call Service) - Block Outgoing Caller ID
Trunk name
Name Absence
Code
XEN Topaz
Trunk name
Absence code
Trunk name
NO CALLER INFO
Features