NEC Xen Topaz Features And Specifications Manual page 102

NEC Business Solutions Ltd XEN Topaz
Caller ID Type (FSK/DTMF)
The type of Caller ID received can be set for each analogue trunk with Program 14-02-
16.
The type of Caller ID sent to each SLT telephone can be set with Program 15-03-11.
ISDN Calls Display Reason for No Caller ID Information
With Caller ID enabled, the system will provide information for ISDN calls that do not
contain the Caller ID information. If the Caller ID information is restricted, the telephone
display will show "PRIVATE". If the system is not able to provide Caller ID information
because telco information is not available, then the display will show "No Caller Info".
Temporary Memory
An unanswered call will the Call History key (PGM 15-07 or SC 851: 08) to flash,
indicating a new call has been placed in the temporary memory. If enabled in
programming, the telephone's display will show "CHECK LIST".
This Caller ID data from the temporary memory can be saved either in Abbreviated Dial
bins or in One-Touch keys making them available for placing future calls.
Caller ID to Abbreviated Dial Name Tagging
If the received Caller ID number matches a number in the Abbreviated Dial bin the
name assigned to the Abbreviated Dial bin will be displayed.
Note that if the received Caller ID includes the callers name then the Abbreviated Dial
Name Tagging will not occur; the callers name will be displayed.
Caller ID to Single Line Telephones
The XN120 can send the caller ID to an analogue single line telephone (SLT)
connected to one of the ST telephone ports. The system will also send the calling party
number and name for internal calls to the SLT.
Note: When caller ID is enabled the ringing pattern is fixed at 2 Sec ON/4 Sec
OFF for internal and external calls.
Conditions
To have pre-answer Caller ID from the voice mail, the call must be an unscreened
transfer.
Default Setting
Receiving callers name and number is disabled for analogue trunks (to enable: set
Program 14-02-10 for each trunk).
Sending caller ID (name and number) is disabled for SLT telephones (to enable: set
Program 15-03-09 for each SLT telephone).
Sending callers name is enabled for SLT telephones (to disable: set Program 15-03-10
for each SLT telephone).
Receiving callers name and number is enabled for ISDN trunks, it cannot be disabled.
Chapter 4 - 94 Features