System Alarm Setup; Table 2-18 Description Of Alarm - NEC SL 1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Use Program 90-10 : System Alarm Setup to assign a status to system alarms. You can designate
an alarm as Major or Minor. This program also assigns whether or not the alarm information is reported
to the pre-defined destination.
Input Data
Item No.
Alarm
No.
1
2
Programming Manual
Downloaded from www.Manualslib.com
Program 90 : Maintenance Program
Alarm Number
Item
01 Alarm Type
02 Report

Table 2-18 Description of Alarm

Re-
Type Name
port
2 0 PKG Initial- 1 The PKG failed
ize Error.
2 The PKG did
2 0 PKG The unit did not
Mounting step on a regular
Error procedure and it
Or, it is not normally
manuals search engine

90-10 : System Alarm Setup

0 = Not Set
1 = Major Alarm
2 = Minor Alarm
0 = Not Report (No autodial)
1 = Report (autodial)
Content of
Cause
Alarm
1 PKG not in-
to initialize. serted firmly.
2 PKG was re-
not start nor- moved, but not
mally. reinserted
firmly.
3 Old PKG data
still reported
due to no ini-
tialization.
1 The package is
not completely
inserted.
was pulled out. 2 The package is
out of order.
inserted.
SL1000/SL1100
001 ~ 100
Input Data
Action Recovery Status
1 Insert PKG During ini-
firmly. tialization,
2 Insert PKG the PKG is
firmly. recognized.
3 Delete slot in-
formation in
Program 90-05
and insert the
PKG again.
1 Please insert When unit is
the package reconfirmed,
firmly. the error is
2 Please try again recovered.
after initializing
the system data
once when LED
doesn't blink
normally.
3 Exchange pack-
ages.
Program
90
Alarm
ERR
REC
ERR
REC
2-511