Table of Contents
Advertisement
•
Exhaust system
•
Rotary pump oil (where applicable)
The need to decontaminate other vacuum areas of the instrument depends on the kinds of
samples the instrument analyzed and their levels of concentration. Do not dispose of the
instrument or return it to Waters for repair until the authority responsible for approving its removal
from the premises specifies the extent of decontamination required and the level of residual
contamination permissible. That authority must also prescribe the method of decontamination to
be used and the appropriate protection for personnel undertaking the decontamination process.
You must handle items used to carry sample into the source area in accordance with laboratory
procedures for contaminated vessels and sharps. To avoid contamination by carcinogens, toxic
substances, or biohazards, you must wear chemical-resistant gloves when handling or disposing
of used oil.
Bottle placement prohibition
Warning:
To avoid injury from electrical shock or fire, and damage to the equipment, do not place
vessels containing liquid atop the workstation or ancillary equipment or otherwise expose those
units to dripping or splashing liquids.
Prohibited:
workstation or ancillary equipment or otherwise expose those units to dripping or splashing
liquids.
Electrical power safety notice
Do not position the instrument so that it is difficult to disconnect the power cord.
Equipment misuse notice
If the equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired.
Safety advisories
Consult
Appendix A
Operating this instrument
When operating this instrument, follow standard quality-control (QC) procedures and the
guidelines presented in this section.
Do not place vessels containing liquid—such as solvent bottles—atop the
for a comprehensive list of warning advisories and notices.
September 7, 2016, 715003560IVD Rev. C
Page vii
Advertisement
Table of Contents
