Qiagen QIAcuity 911000 User Manual page 82

Linking a plate to a pre-defined plate without existing barcode
If the instrument cannot match the barcode on a loaded plate to a barcode that already exists in
the Software Suite, you can link the plate manually. Alternatively, you can create a new plate by
following the steps in section Configuring a plate and starting a run.
To link the barcode to a defined plate in the Software Suite, that has no barcode defined, follow
these steps:
1. Tap the Link icon.
2. In the Select Plate dialog box, select the plate that you want to link to the barcode of the
loaded plate.
Note: Only plates with a Defined status without a barcode assigned can be linked.
3. Tap Apply.
QIAcuity User Manual 06/2022 82