Qiagen QIAcuity 911000 User Manual page 194

Current results
If you want to export current results of analysis please follow the instruction below.
1. Select wells that you want to get results for.
2. Choose if you want to analyze per Target or per Channel by clicking proper tab, and select
targets or channels you are interested in.
3. Click on the Show results button.
4. In the List tab, above the table, on the right-hand side you can see the Export to CSV... option.
5. Click on the Export to CSV option and select the Current results option.
6. Remember that data in CSV reflects data from List View are structured as follows:
Well – identifier of well

Sample/NTC/Control – name of Sample/NTC/Control

Reaction mix – name of reaction mix

Channel – channel name or Target – target name

IC – internal control if selected

Control Type – control type

Concentration (copies/ µl) – calculated conentration

CI (%) – confidence interval parameter

Partitions (valid) – number of valid partitions

Partitions (positive) – number of positive partitions

Partitions (negative) – number of negative partitions

Threshold – value of threshold

Multiple occupancy
If you want to export a number of multiple occupancies for multiplex reaction, please follow the
instructions below.
1. Select wells that you want to get results for.
2. Click on the Channels tab, and select channels you are interested in.
3. Click on the Show results button.
4. In the List tab, above the table, on the right-hand side, you can see the Export to CSV... option.
5. Click on the Export to CSV option and select the Multiple occupancy option.
6. Remember that data in CSV are structured as follows:
Well – identifier of well

Hyperwell – identifier of hyperwell if wells were grouped

QIAcuity User Manual 06/2022 194