Qiagen QIAcuity 911000 User Manual page 55

7. Select Obtain an IP address automatically. If your organization does not provide DNS details,
select Obtain DNS server address automatically as well. Click OK, then Close.
Optional: You can check if the addresses have been assigned properly by following the steps
below.
8. From your Home screen, click the Search icon. Enter cmd and press the Enter key.
9. Wait for the command line window to open. Enter ipconfig command.
10. The address should be visible under the ethernet interface name for which modifications were
made.
Follow the steps below to configure the QIAcuity instrument.
1. Log into the Instrument using the following credentials:
1a. Login: SetupUser
1b. Password: 2#ConnectSuite
2. On the toolbar, tap Configuration.
QIAcuity User Manual 06/2022 55