Qiagen QIAcuity 911000 User Manual page 74

5. Note: When connection to the Software Suite hasn't been established yet, log into the
Instrument using the following credentials:
5a. Login: SetupUser
5b. Password: 2#ConnectSuite
For further information, please refer to section Configuring the connection to the QIAcuity
Software Suite in the QIAcuity instrument software.
6. Tap Login.
7. The Home screen displays.
8. Note: If the username does not match the password or if the username does not exist, an error
message is displayed on the screen. Re-enter the correct credentials in the Username and
Password fields.
Setting up a run
Before starting a run, at least one plate must be created, and its name, plate type and dPCR
parameters must be defined. We recommend that you define plates and their specific parameters
(e.g., the run profile) using the QIAcuity Software Suite. For more information about setting up a
plate using the QIAcuity Software Suite, refer to Operating the QIAcuity Software Suite. For creating
a plate using the plate configurator of the instrument software, refer to Plate configuration
procedure.
Setting up an experiment
Note: A plate run can only be performed if the instrument is connected to the QIAcuity Software
Suite either through a network or a direct cable connection to the QIAcuity Software Suite server.
QIAcuity User Manual 06/2022 74