Qiagen QIAcuity 911000 User Manual page 79

Note: If you are creating a plate, you are automatically assigned as an owner of a plate.
Owners are displayed under plate name on running status page. Modifying owners of the
plate is only possible by editing the plate in Software Suite.
2. Tap dPCR parameter to proceed with the next step.
Note: Each step in dPCR parameter has its own tab. The Priming, Cycling, and Imaging tabs
are mandatory.
3. In the Priming tab, select the applicable priming profile.
4. Perform the following steps in the Cycling tab:
4a. Enter your desired temperature in the Temperature field.
4b. In the Duration field, enter the cycling duration for the plate.
4c. Tap Add temperature step.
QIAcuity User Manual 06/2022 79