Qiagen QIAcuity 911000 User Manual page 232

Heatmap tab for copy number variation
The Heatmap tab contains a heatmap that shows the number of copies per genome in each of the
wells. If a well is not selected as a source for the analysis, the value is not displayed on the heatmap
and its background color is gray.
To view an additional toolbar that enables actions related to the diagram, such as downloading
the plot, hold the pointer over the diagram. For more details about the toolbar, refer to Diagram
options.
To view detailed information about a particular well, point the cursor over the well. A tooltip with
detailed information opens.
To view the mean values for replicates in multiplex tests, click Show mean values for replicates. For
simplex tests the mean values view is always shown for replicates and cannot be disabled.
Note: If the selected analysis source contains replicates of the reference sample, your results can be
calculated only by using mean results for replicates. In this case the "Show mean values for
replicates" checkbox is marked and can't be changed. When the user hover on the checkbox, a
tooltip appears to inform the user that selected analysis source contains replicates of the reference
sample and result is calculated only by using mean results for replicates.
To add the heatmap to the report, click Add to report. For more information on reports, see section
Reports.
QIAcuity User Manual 06/2022 232