2. Then, enter the number of copies/genome. You can choose the value between 1 to 99.
3. Select target of interest from the drop-down list.
4. Reference selection is now unavailable because you have not selected the wells/hyperwells
with the same sample ID for the chosen reference sample.
5. Click on the reference target drop-down list, and select one or more targets.
6. Click the show results button to get results.
Below
you
can
find
the
In this case, well A2 and hyperwell (A3, B3) have the same sample ID for the selected reference
sample.
QIAcuity User Manual 06/2022
example
when
the
reference
selection
is
available.
186