Qiagen QIAcuity 911000 User Manual page 158

4. Click Assign to add the reaction mix to the well.
Note: To edit or remove the reaction mix from the well, right-click the well and select Edit
reaction mix or Remove reaction mix. You can also remove the reaction mix from the well by
clicking the icon and select Remove reaction mix.
Adding samples to the plate
1. On a marked well, click the
Note: You can also mark more than one well if you want to assign a sample to multiple wells.
2. Click Add sample.
3. The Add Sample window appears.
4. Select a sample to add to the plate. To create a new sample, click the Create new tab. See
Defining Samples & Controls for information about creating new samples.
5. Click Assign.
6. The sample is added, and the well is marked with the Sample ID.
Note: To edit the sample or remove it from the well, right-click the well and click Edit sample or
Remove sample. To remove the sample and the reaction mix from the well, select Clear well.
QIAcuity User Manual 06/2022
icon or right-click the well.
158