Adding NTCs to the plate
1. On a marked well, left-click the
Note: You can also mark more than one well if you want to assign a Non Template Control to
multiple wells.
2. Click Add NTC.
3. The Add Non Template Control window appears.
4. Select an existing NTC from the Non Template Control name list or enter a new Non Template
Control name.
5. Click Assign.
6. The NTC is added and the well is marked with NTC.
Note: To edit or remove the NTC from the well, right-click the well and select Edit NTC or
Remove NTC. You can also remove the control from the well by clicking the
Remove NTC. To remove the NTC and the reaction mix from the well, select Clear well.
QIAcuity User Manual 06/2022
icon or right-click the well.
icon and select
160