Qiagen QIAcuity 911000 User Manual page 135

the tracker is turned OFF. In GMP environments, this toggle must not be set to OFF to maintain 21
CFR Part 11 compliance support.
When switched on, the Audit Trail records all actions that happened in the system. Each record
consists of the following:
time stamps (day, month, year, hour)

user login that initiated the event that happened in the system

category of the event (Instrument, Suite, or Plate)

event type, what/who was affected by the action (Plate ID, User login, or Instrument ID)

description of details after a change in table format

Audit trail tracker settings
To turn the Audit trail tracker ON/OFF, on the main toolbar, click the Configuration tab.
On the left-hand side, you can see the tabs menu. Click on the Audit Trail tab.
On the center of the page is the second tabs menu panel. Click the Audit trail tracker settings tab.
QIAcuity User Manual 06/2022 135