Qiagen QIAcuity 911000 User Manual page 61

Configuring the connection to the QIAcuity Software Suite in the QIAcuity instrument
software
The QIAcuity instrument needs to be connected to the QIAcuity Software Suite to enable the
exchange of data. To establish a connection, the instrument and the device in which the QIAcuity
Software Suite is running must be connected to the same network.
Note: A plate run can only be performed if the QIAcuity Software Suite is connected to the
instrument through a network or direct cable connection to the QIAcuity Software Suite server.
To connect the instrument to the QIAcuity Software Suite:
1. The Network Icon represents the connection between the QIAcuity Software Suite and the
Instrument. When the icon is red, the connection is not established.
2. Log into the Instrument using the following credentials:
2a. Login: SetupUser
2b. Password: 2#ConnectSuite
Note: SetupUser is only allowed to log into the instrument when connection with the Software
Suite is not established. Once established, login with SetupUser cannot be done.
3. On the Home screen, tap Configuration.
4. Tap the Software Suite tab.
QIAcuity User Manual 06/2022 61