Mitsubishi Electric MELSEC-LD77MS2 User Manual page 55

Understand the product functions and usage methods, the configuration devices
1)
and specifications required for positioning control, and design the system.
Install the Simple Motion module onto the CPU module, wire the Simple Motion
2) module and external connected devices (servo amplifier, etc.) and wire the PLC
CPU and peripheral devices.
Using GX Works2, set the servo parameters, parameter, positioning data, block
3)
start data and condition data required for the positioning control to be executed.
4) Using GX Works2, create the sequence program required for positioning operation.
Write the parameters and positioning data, etc., created with GX Works2 into the
5)
Simple Motion module.
6) Using GX Works2, write the created sequence program into the PLC CPU.
Carry out test operation and adjustments in the test function of GX Works2 to
check the connection with the Simple Motion module and external connected
7)
device, and to confirm that the designated positioning operation is executed
correctly. (Debug the set "parameters" and "positioning data", etc.)
Carry out test operation and adjustment to confirm that the designated positioning
8)
operation is executed correctly. (Debug the created sequence program.)
Actually operate the positioning operation. At this time, monitor the operation state
9)
as required. If an error or warning occurs, remedy.
10) Maintenance of the Simple Motion module as required.
11) Dispose of the Simple Motion module.
The following work is carried out with the processes shown on the previous page.
Details
1 - 25
Chapter 1 Product Outline
Reference

Chapter 1

Chapter 2

Chapter 3

Chapter 8 to Chapter 14

Chapter 4

Chapter 5

Chapter 8 to Chapter 14

Simple Motion Module Setting
Tool Help

Chapter 6

GX Works2 Version1
Operating Manual (Common)

Chapter 7

Simple Motion Module Setting
Tool Help

Chapter 7

GX Works2 Version1
Operating Manual (Common)

Chapter 14

Simple Motion Module Setting
Tool Help

GX Works2 Version1
Operating Manual (Common)

Chapter 5

Chapter 16

Simple Motion Module Setting
Tool Help

GX Works2 Version1
Operating Manual (Common)

Chapter 4

Chapter 4