Mitsubishi Electric MELSEC-LD77MS2 User Manual page 132

Hide thumbs Also See for MELSEC-LD77MS2:

Table of Contents

20cm(7.87inch) to

30cm(11.82inch)

Using the AD75CK, you can tie four cables of about 7mm (0.28inch) outside diameter

together for grounding.

(Refer to the "AD75CK-type Cable Clamping Instruction Manual" (IB-68682).)

Do not ground the cable clamp to the top of control panel. Doing so may lead to damage by

damage of screws, etc. during installation or removing the cable clamp.

Chapter 4 Installation, Wiring and Maintenance of the Product

(6) To make this product conform to the EMC directive instruction and Low

Voltage Directives, be sure to use an AD75CK type cable clamp

(manufactured by Mitsubishi Electric) for grounding connected to the control

box and the shielded cable.

[How to ground shielded cable using AD75CK]

Shielded cable

Inside control box

Ground terminal installation screw (M4 8 screw)

Installation screw to control box (M4 screw)

Ground terminal