Getting The Most From The T10 Smart Thermostat; Setting The Time/Date - Honeywell Home T10 Pro RedLINK Manual

3. Write down the date code from that screen. The
touch the left arrow at top of display to go to previ-
ous screen.
4. Scroll down until "installer Options" is shown. Touch
"installer options" and enter date code.
How to find more options
1. Touch the menu button.
2. Scroll up and down for more options.
1
Fig. 44.
Installer Options Menu
Installer setup
Setup thermostat. See Table 5 beginning on page 17.
Installer Test
• Turn on or off heat stages
• Turn on or off cool stages,
• Turn on or off em heat stage,
• Turn on or off IAQ equipment
Dealer Information Setup
Enter installer company name, phone number, website,
and email. That way if customer gets an alert or reminder
the contractor contact information can be displayed.
Devices and Sensors
• View the thermostat and any RedLINK accessories from
this screen.
• Add a RedLINK accessory.
• Identify a wireless sensor. (The thermostat will prompt
you to remove the cover from the sensor you want to
identify and press the button on the sensor. The
thermostat will display the name of the sensor (the
room name you selected when linking the sensor to the
thermostat).
Thermostat Information
• Mac Address
• Date Code
• Model number
• Build date
• Collection Version
• Bootloader Version
• Application Version
• Wi-Fi Bootloader Version
• Wi-Fi Application Version
• RedLINK Application Version
2
Installer Options
MCR37799
31
T10 PRO SMART THERMOSTAT WITH REDLINK
Reset
• Reset Schedule
• Delete all sensors
• Factory Reset
• Reset Wi-Fi?
Getting the most from the T10 Smart
Thermostat
Prioritize Rooms
Prioritize a specific room or multiple rooms, or let comfort
follow your move using built-in motion detection.
Control on the Go
Adjust your thermostat from anywhere using your tablet or
smartphone.
Save Energy
With geofencing, you can save money on the most expen-
sive part of your energy bill while you're away.
Simple Installation
The thermostat automatically programs itself. Just answer
a few simple questions and you'll be up and running in
no time.
Whole-Home Range
With a 200-foot range, 20 sensors with temperature,
humidity, and occupancy detection can connect to your
thermostat from throughout your home.
Know Your Home Is Safe
Get customizable alerts on your mobile device when the
basement is so cold a pipe could burst, or if the baby's
room is getting too hot.
Using your thermostat
The screen will wake up by pressing the center area of the
displayed temperature.
Current Priority
Displays the type of
priority and
number of rooms
being prioritized.
Indoor
Temperature
Displays the
current indoor
temperature.
Menu
Contains features
such as mode, fan,
schedule, priority,
and other
thermostat
settings.
Fig. 45.

Setting the Time/Date

When the thermostat is linked to the home Wi-Fi router
and registered to an account using the Honeywell Home
app, the date and time will update automatically.
If not using Wi-Fi you can set the time/date as follows:
2
Indoor
Humidity
Displays the
18%
current indoor
humidity
Desired
Temperature
Displays the
74
desired
temperature.
M37800
33-00462—01