Mitsubishi Electric MELDAS C6 Instruction Manual page 485

(4) S-analog output adjustment related
ADJUST EXECUTION
ADJUST COMPLETE
(5) Auxiliary axis related
CONTINUE Y/N
BACKUP EXECUTION
BACKUP COMPLETE
AUX. WRITING EXEC.
WRITE COMPLETE
ABS POS RESTORED
(6) Others
DATA PROTECTING
BASE PARA. SET? (Y/N)
BASE PARA. EXECUTION
FORMAT? (Y/N)
FORMAT EXECUTION
SETUP COMPLETE
NON SETUP
CONFIRM OPE? (Y/N)
Downloaded from ManualsNet.com
7.9 Operation Messages on Setting Display Unit
Message
Message
Message
search engine
7. List of Alarms
Message details
• Analog output adjustment is being executed without error.
• Analog output adjustment has completed without error.
Message details
• Type Y or N to specify whether to perform operation.
• The auxiliary axis parameters are being backed up in SRAM.
• The backup of the auxiliary axis parameters in SRAM has been
completed.
• The auxiliary axis parameters in SRAM is being written to
MR-J2-CT.
• The writing of the auxiliary axis parameters in SRAM to
MR-J2-CT has been completed.
• The absolute position in SRAM has been restored in MR-J2-CT.
Message details
• The data protection key is valid‚ and the various data cannot be
set or erased‚ etc.
• Waiting for the key input of standard parameter setting (Y/N).
• The standard parameters are being set.
• Waiting for the key input of execute format (Y/N).
• Formatting is being executed.
• The simple setup has been completed.
• Completed without executing simple setup. (When "N" has been
set for either "Standard parameter setting? (Y/N)" or "Execute
format? (Y/N)".)
• Confirmation for erasing operating time or alarm history.
IV - 69