Mitsubishi Electric MELDAS C6 Instruction Manual page 290

3.4.6.2 Keyboard Function
The keyboard can be used to designate the copy destination file name in the COPY function.
The keyboard function can be used under the following conditions.
• When the copy destination is "MEMORY CARD"
• When the copy destination is "NC MACHINE" and the directory is "MACHINING PROGRAM"
The keyboard will open when the file name input file din area B is pressed.
The data set in the file name input column will be input when the Enter key is pressed, and the
keyboard will close.
(1) Explanation of each key 1 (Character keys)
A
K
U
¥
.
1 2
! #
, [
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.4 Data In/Out Screen (For only the panel computer)
Key
B C D E F G
L M N O P Q
V W X Y Z SP
∗
_ /
3 4 5 6 7
$ ' ( ) ` =
]
search engine
Press here.
Keyboard opens.
Each character is input at the cursor position.
H I J
R S T
+ -
"¥" is input at the cursor position. (This is for future
expansion and cannot be used for the file name.)
"." is input at the cursor position.
Use this as the delimiter between the memory card
file name and extension.
Use these to input the machining program's O No.
8 9 0
and to input the directory name and file name in
the storage device, such as the memory card.
These characters can be input when the SHIFT
key is pressed.
I - 275
Operation