Data Output - Mitsubishi Electric MELDAS C6 Instruction Manual

9.2.2 Data Output

(1) Explanation of function
User PLC stopping operation
Data group output operation
Setting area operation
# (99) DATA (
# (99) DATA (
# (99) DATA (
Single data output function
Setting area operation
# (99) DATA (
(Note 1) If a data No. that is not in the specifications is set, the error message "E06 NO SPEC" will
(Note 2) Refer to "9.1 Data Input/Output Function" for the data type.
Downloaded from ManualsNet.com
9.2 Data Input/Output by RS-232C
When the user PLC is stopped, the various data can be converted from HEX to ISO/EIA and
output to the external RS-232C device on the output screen.
This function can be used only when the user PLC is stopped.
To stop the user PLC, enter the emergency stop state by pressing the emergency stop button,
and set the rotary switch NCSYS to "1".
ALL1) Plain data
ALL2) File data
ALL3) PLC program 250, 252 to 299
) Single data
display, and the data will not be output.
When group output is executed, the data not in the specifications will not be output.
search engine
9. Maintenance Functions
Output data (No.)
100 to 149
200 to 231
Output data (No.)
100 to 149, 150 to 199, 200 to 231, 250 to 299
III - 57