Mitsubishi Electric MELDAS C6 Instruction Manual page 129

(4) Setting the MDI running start position
Move the cursor to the head of the
block to be defined as the starting
position.
1) The "MDI NO SETTING" status returns.
Press the
1) MDI running is enabled, beginning with
2) The specified block is displayed at the top
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
To start processing with a halfway block after setting MDI data, specify the starting block. First,
set the data according to "Setting MDI Data." At this time, the running start position is set in the
starting block of data. If it is desired to be changed, move the cursor to the head of the block to
be defined as the starting position. Then, press the
(Example) When the block containing M02 is desired to be executed.
key.
INPUT
the specified block.
of the screen head with "MDI SETTING
COMPLET" displayed.
search engine
2.5 Program
INPUT
I - 114
key.