Displaying Automatic Operation Program - Mitsubishi Electric MELDAS C6 Instruction Manual

2.2.1.4 Displaying Automatic Operation Program

(1) Displaying the operation program during automatic operation
(2) Displaying the operation program after SEARCH
(3) Displaying the operation program at branch to or at return from subprogram
(4) Difference between one block of machining program and one execution block
(Note) When a parameter "MACRO SINGLE" is ON, a variable command block is regarded as an
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
(5) The set data will be canceled if screen change is executed during manual numeric command
operation.
(6) If operations in which manual numerical commands are carried out (M, S, T keys) are
attempted when the manual numerical command protect function is valid, the error
message "E05 SETTING NOT POSSIBLE" will occur.
During memory or MDI operation, up to four blocks of the specified program are displayed. The
block being executed or the completed block will display at the top line.
In operation program display immediately after SEARCH, the block for which the search
command is issued is the command program to be executed next.
When a branch command (M98) block is executed, the subprogram is immediately displayed.
When a return command (M99) block is executed, the main program is immediately displayed.
1) A command block containing an EOB only or a command program consisting of only a
comment statement is not regarded as an execution block but is processed together with
the following command program.
2) A command block such as a variable command that contains neither move nor MSTB
command is not regarded as an execution block but is processed together with the next
block that contains a move or MSTB command.
execution block.
search engine
2.2 Monitor
I - 30