Command; Execution Program Monitor - Mitsubishi Electric MELDAS C6 Instruction Manual

2.2.3 Command

When the menu key
This screen consists of three pages. It displays the execution program monitor, execution modal
monitor, and cumulative time data. Page switching is by pressing the

2.2.3.1 Execution Program Monitor

This screen displays the active machining
program's execution blocks for
monitoring.
O12345678 N12345-12
<SUB>
N50;
N90;
N100;
[WORK]
X
Y
Z
A
B
C
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
is pressed, the COMMAND screen is displayed.
COMMAND
Display item
The currently executing program number, sequence number, and
block number are displayed.
O1000 When a subprogram is being executed, the program number,
N200-30 sequence number, and block number of the subprogram are
displayed.
The current program being executed is displayed.
The cursor is moved to the top of the current block being
executed.
When program execution reaches N90, the cursor is also moved
to the top of N90.
When the N100 block is executed, the N100 block is displayed
starting at the top of the screen and the cursor is also moved to
the top.
The coordinates in the workpiece coordinate system being currently
100.000 executed are displayed.
200.000
300.000
0.000
0.000
123.456
search engine
2.2 Monitor
[COMMAND]
O12345678 N12345-12
<SUB> O 1000
N50 ;
N60 ;
N70 ;
N80 ;
N90 ;
N100 ;
POSI COORDI COMMAND
Explanation
I - 33
NEXT BACK
or
MONITOR 3. 1/3
[WORK]
N 200-30 X 100.000
Y 200.000
Z 300.000
A 0.000
B 0.000
C 123.456
SEARCH MENU
key.