Outputting History Data - Mitsubishi Electric MELDAS C6 Instruction Manual

2.6.2.5 Outputting History Data

History data can be output. The output operation can be performed even during automatic
operation.
(1) History data output operation
Set the data type to the history
data.
# ( 6 0 ) DATA (COMMENT)
Press the
1) Data output starts and the contents of
2) When tape end code % (EOR) is output,
Format of data output to RS-232C
(Note) The output data is ASCII or Shift_JIS code.
* Comment is set in the parentheses of TRACE ( ).
* If the input/output device parameter "#9112 CR OUTPUT" is set to 1, the history data can be
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
key.
INPUT
the output data and message "DATA
OUT EXECUTION" are displayed.
the data output completes with message
"DATA OUT COMPLETE" displayed.
(Example)
%
TRACE (COMMENT )
00/01/01 SP 13:59:58 SP CAN LF
00/01/01 SP 13:59:56 SP Y220 LF
00/01/01 SP 13:59:55 SP !Y220 LF
00/01/01 SP 13:59:02 SP P153 I.F ERROR $1 LF
:
00/01/01 SP 13:00:56 SP Y218 LF
%
output with a CR attached before LF.
search engine
2.6 Data In/Out
LF
I - 150
(COMMENT)
(COMMENT)