Mitsubishi Electric MELDAS C6 Instruction Manual page 256

Draw the graphics again with the
same program.
(3) Changing the scale and display position during the 2-plane display mode
Changeover between upper and lower planes
Press the menu key
1)
2)
Press the menu key
again.
1)
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
1-plane and 3-dimensional display modes are as explained before, but in the 2-plane display
mode the display positions of the upper and lower planes can be changed separately.
Although the scale of either plane can be changed in the 2-plane display mode, the same scale
is always applied to the upper and lower planes. Similarly, the horizontal axis can also be
changed on either plane.
SCALE
The cursor indicating the center
appears in the center of the lower
plane. The lower plane display
range can now be changed.
The method for changing the
scale and display position is the
same as for 1-plane and 3-
dimensional display described
above.
SCALE
The cursor moves to the upper
plane. The upper plane display
range can now be changed.
search engine
2.8 Graphics
.
I - 241
TRACE EXECUTION
SCALE
SCALE