Mitsubishi Electric MELDAS C6 Instruction Manual page 305

(2) Menus
The setting data of "Setting", "TIME/Div", and "Trigger" are retained during real time mode.
Menu
Setting
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.7 Realtime Wave Screen (For only the panel computer)
The following display data setting items will appear.
Select the setting item by touching the line to be selected or by using the UP/DOWN cursor
buttons.
Select the display data from the data select button.
Axis Displays the axis to be displayed in waveform.
If there are multiple axes, the displayed axis can be changed.
Data Select the display data from the following data select buttons.
Servo axes:
"Torque" is displayed only when a servo axis is selected on "Axis" during the
real time mode.
To display the "Torque" correctly, set proper values to the servo parameters.
Spindle axes:
Sync-tap
err width
"Sync-tap err width" and "Sync-tap err angle" are displayed only when a
spindle is selected on "Axis" during the real time mode.
The units of displayed data are as follows.
SpeedFB
Current
CurrentFB
Position
PositionFB
Droop
Torque
Sync-tap err width
Sync-tap err angle
Data/Div Set the vertical axis scale. (1 to 99999999)
The setting can be changed with
.
search engine
Details
(Changeover by
Sync-tap
err angle
r/min
%
%
interpolation unit
interpolation unit
interpolation unit
interpolation unit
µm
0.001 °
I - 290
button)
. The setting digit can be selected with