Program File - Mitsubishi Electric MELDAS C6 Instruction Manual

2.6.4 Program File

When the menu key
The PROGRAM FILE screen lists the user-prepared machining programs stored in memory.
PROGRAM ENTRY and
REMAIN
CHARACTER and REMAIN The number of characters already registered as user machining programs is
<PROGRAM> <CHR>
<ST> <COMMENT>
(Note 1) If a large number of short programs are registered or edit operation is performed
(Note 2) If preparing comment, space (
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
FILE
is pressed, the PROGRAM FILE screen is displayed.
Item
The number of programs already registered as user machining programs
is displayed in the PROGRAM ENTRY field. The remaining number of
programs that can be registered is displayed in the REMAIN field. The
sum total of the PROGRAM ENTRY and REMAIN values is the maximum
number of registered programs. This value is defined in the specifications.
displayed in the CHARACTER field. The remaining number of characters
that can be registered is displayed in the REMAIN field. The sum total of the
CHARACTER and REMAIN values is the maximum number of stored
characters. This value is defined in the specifications.
A value in 250-character units is displayed in REMAIN.
<PROGRAM>
<CHR>
<ST>
<COMMENT>
frequently, the memory use efficiency lowers because of the memory configuration and
(CHARACTER + REMAIN) becomes less than the maximum number of available
characters that are stored. If the difference between them is extremely large, the
condense function can be used to improve the memory use efficiency.
after registration for efficient use of memory.
search engine
2.6 Data In/Out
Explanation
The numbers of the already registered machining
program are indicated in the ascending order in the
range of 1 to 99999999.
The number of stored characters is indicated for each
machining program number.
The machining program status is indicated. (Not used)
A summary of the machining program functions,
specifications, and applications can be displayed as a
comment of up to 18 alphanumeric and symbol
characters.
It can be specified by data input. It can also be set on
the screen.
) can be written in it. But, the space is ignored
SPASE
I - 158