2.2.6.1 Common Variable Display
(1) When a common variable command exists, if the block is executed, the execution result is
(Example)
The following machining program is
executed.
#101=12.3456
(2) When a command to set variable names for common variables #500~#519 by user macro
(Example)
The following machining program is
executed.
SETVN 501 [POINTER,
COUNTER];
Downloaded from
ManualsNet.com
2. Screen Operation of A985GOT
displayed.
exists, if the block is executed, the setup variable name is displayed.
Variable name setting and reference commands require the user macro specifications and are
limited to 20 common variables #500~#519. The variable name is a string of up to seven
alphanumeric characters beginning with an alphabetic character. For common variables
#500~#519, the variable numbers, data, and variable names are displayed as shown below:
search engine
2.2 Monitor
I - 41