Mitsubishi Electric MELDAS C6 Instruction Manual page 274

6. Axis status
7. Machining
8. Alarm
9. G command
10. Workpiece
11. Feedrate (FC)
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.3 2-System Monitor Screen (For only the panel computer)
Display items
This displays the currently executed position and the status symbol when
the position is at a specified position or status.
#1 to #4 : 1st to 4th reference point position
] [
> <
MR
program
currently being
executed
[MAIN] O... This displays the program No., sequence No. and block No. currently being
executed.
[SUB] O... When executing a subprogram, the subprogram program No., sequence
No. and block No. are displayed.
(PROGRAM) The details of the machining program currently being executed are
displayed.
The characters of the block being executed are displayed in blue.
The code and No. or message regarding the operation alarm, program
error, MCP alarm, spindle alarm, servo alarm or system error is displayed.
Up to two alarms can be displayed.
The state of the G command modal currently being executed are displayed.
modal
The G command modal displayed differs depending on the modal (lathe/
machining center).
G01··· G94··· The state of the G command modal currently being executed is displayed.
G41: The tool radius offset modal is displayed.
D1 Offset No.
=30.000: Shape offset amount for tool radius
0.040 Tool radius wear amount
G43: The tool length offset modal is displayed.
Z Offset axis name
H20 Offset No.
=250.500: Offset amount
0.240 Tool length wear amount
The data indicated the counted No. of workpieces is displayed on the left,
count
and the maximum value (#8003 WRK LIMIT) is displayed on the right.
During interpolation feed, the speed in the vector direction currently being
moved in is displayed.
During each axis independent feed, the speed of the axis with the highest
speed is displayed.
search engine
Explanation
: Servo OFF state
: Axis removal state
: Mirror image
I - 259