Mitsubishi Electric MELDAS C6 Instruction Manual page 298

Menu
WAVEFORM
HISTORY
CAUSE
LIST
SEARCH
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.6 NC Alarm Guidance Screen (For only the panel computer)
The WAVEFORM screen will open.
Refer to the "3.5.2 NC Alarm Screen (waveform display)".
When the HISTORY menu is displayed, the guidance displayed up to that point will
appear.
If the history contents do not fit in the list, press the function selection menus UP
and DOWN to scroll the page.
The first line of the guidance is displayed for the evaluation item.
The YES and NO selected according to the guidance details are highlighted, and
number that the display was jumped to is also displayed.
Only the first line of the
guidance details is displayed.
When the CAUSE LIST menu is pressed, all alarm factors are displayed.
The number of alarms that occurred, and the date of the last alarm occurred are
displayed in the list. If the possible causes do not fit in the list, press the function
selection menus UP and DOWN to scroll the page.
(Note) For the number of occurrences, the cause displayed when the EXIT menu is
pressed is counted up.
search engine
Details
The selection results
are displayed.
Alarms other than those currently
occurring can also be searched.
Touch the alarm in the list for which the
guidance is to be displayed.
I - 283
The guidance jump
destination is displayed.