Tool Life Management Ii ("#1096 T_Ltype" Is 2); Group Registration - Mitsubishi Electric MELDAS C6 Instruction Manual

(Refer to "2.3 (II). Tool Offset
(M system)" for M system.

2.3.5 Tool Life Management II ("#1096 T_Ltype" is 2)

The tools used are classified into several groups. With this tool life management with spare tool
function, tool life (usage time, count) is managed for each group. When a tool's life is reached, an
equivalent spare tool is selected in order from the group to which that tool belongs.
(1) No. of tool life management tools
(2) No. of groups
(3) Group No.
(4) No. of tools per group : Max. 16 tools
(5) Service lifetime
(6) Service life count

2.3.5.1 Group Registration

(1) Page 1 of the TOOL LIFE screen displays the life management data of the tool currently being
used and the list of registered groups of tools. This page is mainly used for monitoring tool life
data in group units.
The monitoring of each tool's data in the group, and setting of the group No. and tool life
management data are carried out on the next page.
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
: 1-part system: max. 80 tools, 2-part system: max. 40 tools/part system
: 1-part system: max. 80 tools, 2-part system: max. 40 tools/part system
: 1 to 9999
: 0 to 999999 min. (approx. 1667 hours)
: 0 to 999999 times
1) Display details
< CHOSEN TOOL >: The life management information of the tool currently being used
FORM : The incrementation unit of the life data appears here.
ST : The tool status appears here.
TOTAL : For tools using multiple compensation Nos., the total of the usage
< GROUP LIST > : All registered group Nos. appear here.
search engine
2.3 (I). Tool Offset (L system)
TOOL LIFE screen Page 1
appears here.
0: Time 1: Count
0: Not used tool
2: Normal life-reached tool
data for each compensation appears here. If there is only one
compensation No., the data will be the same as "USED".
A highlighted group No. indicates that the lives of all tools registered
in that group have been reached.
I - 67
1: Current tool (tool being used)
3: Tool skip tool