Mitsubishi Electric MELDAS C6 Instruction Manual page 237

(b) Starting and stopping the operation
The following operation start and stop operations apply to the "JOG", "INCREMENTAL", and
"MANUAL OPERATION" modes.
After setting the mode with the operations described in item (a), the operation is started and
stopped using the following operation keys.
Normal rotation
Reverse rotation
Stop
The operation is stopped and the operation adjustment mode is canceled if after starting, the
screen is changed from the AUXILIARY AXIS MONITOR screen to another screen, or the monitor
axis is changed.
The following table shows the relation between the various key operations and the operation start/
stop.
Key operation
FORWARD RUN
START ↑ key
REVERSE RUN START
↓ key
ALPHANUMERIC
CHARACTER key
CNC FUNCTION,
MENU KEY,
NEXT/PREVIOUS
PAGE key
→← , TAB key, SHIFT,
CB, DEL, INPUT key,
MENU key, CYCLE
START, RESET key,
etc.
(Note 1) The emergency stop of the hotline with the CNC unit is always valid, so set bit 2 (bus
(Note 2) CNC axis handle movement is invalid in the MR-J2-CT handle mode.
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Function
Operation key:
Operation key:
Operation key:
Press any key other than
the SHIFT key.
(Example)
Stop status
Normal
Abnormal
Remain in stop
status
Remain in stop
status
Remain in stop
status
emergency stop invalid) of the MR-J2-CT parameter #103 Emgcont to "1".
The No. 1 handle is fixed for the MR-J2-CT handle mode.
search engine
2.7 Diagnosis
Operation key
↑
↓
A key
Operation status (status before key operation)
Forward run
status
Stop
Stop
Stop
Stop
Remain in
forward run
status
I - 222
Details
This starts the rotation in the forward
run direction. The rotation will stop if this
key is pressed while starting.
This starts the rotation in the reverse
run direction. The rotation will stop if this
key is pressed while starting.
This stops the rotation during forward or
reverse run.
Reverse run
status
Stop
Stop
Stop
Stop
Remain in
reverse run
status
Screen
change
No change
No change
No change
Change
No change